Make A Simple Tool To Measure The Aura  

by Deborah Sexton

Step 1 Using an ordinary coat hanger, make two cuts in it as indicated

Step 2 Bend the side portion of the hunger upright. It stands vertically at a 90 degree angle.

Step 3 Roll a piece of cardboard up and tape it. It should be stiff enough so you can grip it, and it should loosely fit over the vertical bar of the hanger.

Step 4 Slide the cardboard handle over the vertical bar, so that at least one inch sticks out.

Step 5 Bend this over to keep the cardboard on. Turn the rod upright. Step 6 Repeat

Making And Using Dowsing Rods

Making and using dowsing rods is simple and fun. Everything that you need to make them can be found around the home.

These instructions will show you how to make the set of L-Rods.

• Step 1. Take an ordinary wire coat hanger and make two cuts in it at the spots shown in the diagrams.
• Step 2. Bend the side part of the hanger so that it is completely vertical, forming a 90 angle with the bottom.
• Step 3. Cut a piece of Cardboard the size of the small side of the L-shaped hanger. Roll it up tight enough so that it will fit over the hanger, but it should not fit snugly. It should fit loose. Then tape the cardboard into this position. This will form the handle for your dowsing rod.
• Step 4. Now trim the cardboard so that at least one inch of the wire hanger extends out from it. 
• Step 5. Bend this over so that the handle cannot slide off when the rod is in an upright position.
• Step 6. Now repeat this process with a second hanger to create a pair of rods. The rods should swing freely in the handles when finished. They should appears cingular. Tuesday was shown and in the diagram.

Many dry-cleaner hangers have a cardboard roll on the bottom portion of the hanger. This can be removed, cut and used as an effective.

How To Hold The Rods

The Rods have to be held at the waistline with the elbows against the body. This way they don't move due to any other disturbance.

How To Use The Rods To Measure Your Aura

These rods can be used for many purposes, but for our purpose, they will be used to measure the Aura. Have someone stand against the wall while holding the rods, one in each hand. Make sure that the rods are facing forward (As seen in picture above). Now approach the rods one step at a time. When your aura reaches/touches the rods they will open/spread apart. The rod in the person's right hand should swing to the right and the one in the person's left hand should swing to the left.
If they both move to the same side, left or right, this can mean that one side of your aura is larger than the other.

The rods can also be used to find energy in your home. If you feel there are spirits or ghosts around, you can find them by walking the parameters of your home.